Hand-Pump Foam Sprayer 2–3 L (68–101 oz)
Only 12 units left!
In stock, shipped within 24/48 hours
Features & specs
- Capacity: 2 L (68 oz), 2.3 L (78 oz) or 3 L (101 oz), depending on the model
- Material: HDPE plastic, resistant to acids and alkalis
- Operation: hand pump in the cap, no power or battery
- Nozzles: foam nozzle; depending on the model also 55° fan, shower, wind-resistant or straight
- Extras by model: measuring cup for shampoo, side fill opening, pressure relief valve (2 L model with valve)
- Suggested mix: shampoo to water 1:30, tank half full
- Colors: clear, smoke, gray and blue, white
- In the box: 1 sprayer with the nozzles of the model you pick (shampoo not included)
Which one to choose?
- 2 L with valve and wind-resistant nozzle: the only one with a pressure relief valve, so you can vent it before opening the cap.
- 2 L with 2 or 3 nozzles: if you want to switch between foam, fan spray and shower.
- 2 L standard or white: the no-frills option for a quick pre-wash.
- 2.3 L and 3 L with measuring cup: for bigger cars and SUVs and for dosing shampoo exactly; with a wind-resistant or straight nozzle.
- With side opening: easier to refill without unscrewing the whole cap.
How to use it
- Add car shampoo and water at a 1:30 ratio, filling the tank about halfway.
- Screw the cap on tight and work the pump rod until you feel the tank is pressurized.
- Spray the foam over the whole car, working from the bottom up.
- Let it dwell a few minutes without drying in the sun, then wash with a mitt and rinse.
- When you're done, release the pressure (use the valve on the valve model) and rinse the tank with clean water.
Why choose this hand pump foam sprayer
The two-bucket method only protects your paint if the heavy grime has been loosened first. That's what foam does: it clings to the paint, softens dust, bugs and road film and lets them slide off, so your wash mitt doesn't drag grit across the clear coat and leave swirl marks. A lot of people skip this step because they think it takes a pressure washer and a foam cannon. A pump foam sprayer gives you the same pre-wash with a tool that fits on a garage shelf.
It's the right pick if you live in an apartment, wash in a garage with no outlet, or want a quick pre-treatment before the car wash. It's also handy on wheels, glass and wheel wells, where foam helps lift brake dust.
What sets it apart from basic spray bottles is the chemical-resistant HDPE tank and the choice of nozzles and sizes. Go with 2 L for a compact car, or 3 L for an SUV so you're not refilling halfway through the wash.
Thick pre-wash foam, no pressure washer needed
A proper foam pre-wash usually means a pressure washer, an outlet and a hose hookup. If you wash your car in a garage, a driveway or an apartment lot, you often have none of that, so you end up scrubbing dirt into the paint with a sponge. This hand pump foam sprayer runs on nothing but the pump in the cap: fill it, pump it and cover the car in foam. The tank is HDPE plastic, resistant to acids and alkalis, so it handles car shampoo and cleaners without a problem.
The benefits at a glance
-
Hand pump, no cords
You build pressure by pumping the cap: no power, no battery, no garden hose. -
Foam at a 1:30 mix
One part car shampoo to 30 parts water is enough. -
Extra nozzles, depending on the model
Besides the foam nozzle, some models come with a 55° fan nozzle and a shower nozzle; others have a wind-resistant nozzle for a tighter foam spray outdoors. -
Chemical-resistant HDPE
The tank is HDPE plastic, resistant to acids and alkalis, so wheel cleaners and alkaline pre-wash products won't break it down. -
Reinforced pump rod
The pump rod is thicker than usual, so you reach pressure with less effort. -
Sizes from 2 to 3 L
2 L (68 oz) for small cars and quick washes, 2.3 L (78 oz) and 3 L (101 oz) for larger cars and SUVs.
